Version 2.2-10
January 2006

Adds new definitions for Dell, Fuji Xerox, HP, Kyocera Mita, Minolta, Ricoh, and Xerox printers and multi-function devices. Includes validated definitions for devices from Fuji Xerox, HP, IBM, Konica, Kyocera Mita, Lexmark, Ricoh, Tektronix, Xerox and others.

The PrintKit Printer Model Definition Supplement 2.2-10 contains new model definitions. The definitions in this supplement have been validated for correctness.

For more recent models, and additional models that may not be fully validated, see the current Preliminary Printer Model Supplement.

This kit should be applied to PrintKit 2.2-3 or later 2.2 versions ONLY.

Documentation downloads

The Quick Start document includes installation instructions and release notes. It is also included in the installation kit downloads.

Quick Start text, 13.3 kb
Installation kit downloads

The downloadable installation kit is a single self-extracting archive. Once you've transferred this file to your OpenVMS system, you run the file to unpack the individual components of the distribution, which consist of a VMSINSTAL saveset and the Read Me document.

The downloadable kit is a binary file. Be sure to keep this in mind if you need to transfer it between systems. (For instance, use TYPE IMAGE with FTP.) It should appear on your OpenVMS system with fixed-length 512-byte records.

Separate versions of the kit are provided for each of the OpenVMS hardware architectures. Each version contains a full kit – once unpacked, it can be installed on any of the hardware architectures – but each architecture requires its matching version of the self-extract code.

PKMODELS 2.2-10 alpha, 7.29 mbvax, 7.28 mb
Model definitions included in kit

This kit supplies definitions for the following printer models. For each model, version numbers indicate the revision of the preliminary Supplement Kit which introduced the definition, and any revisions which changed it.

Dell Laser Printer 5100cn2.2-10 new, validated
Fuji Xerox DocuCentre 155/1852.2-10 new, validated
Fuji Xerox DocuCentre 350/450 I2.2-10 new, validated
Fuji Xerox DocuCentre 550 I2.2-10 new, validated
Fuji Xerox DocuPrint 240a/340a2.2-10 new, validated
Fuji Xerox DocuPrint C16182.2-10 new, validated
Fuji Xerox DocuPrint C24262.2-10 new, validated
Fuji Xerox DocuPrint C2535A2.2-10 new, validated
Kyocera Mita FS-9500DN2.2-10 new, validated
Minolta Di3502.2-10 new, validated
Minolta Di470/Di552 (Pi4700e)2.2-10 new, validated
Ricoh Aficio 1013/1013F2.2-10 new, validated
Ricoh Aficio 2035/20452.2-10 new, validated
Xerox DocuColor 122.2-10 new, validated
Xerox DocuColor 35352.2-10 new, validated
Xerox Document Centre 535/545/5552.2-10 new, validated
Xerox Phaser 4500 Series2.2-10 new, validated
Xerox Phaser 5500 Series2.2-10 new, validated
Xerox Phaser 6250 Series2.2-10 new, validated
Xerox Phaser 6300 Series2.2-10 new, validated
Xerox Phaser 7300 Series2.2-10 new, validated
Xerox Phaser 7400 Series2.2-10 new, validated
Xerox Phaser 8200 Series2.2-10 new, validated
Xerox Phaser 8400 Series2.2-10 new, validated
Xerox Phaser 8500 Series2.2-10 new, validated
Xerox WorkCentre M20/M20i2.2-10 new, validated
Xerox WorkCentre M242.2-10 new, validated
Xerox WorkCentre M118/M118i2.2-10 new, validated
Xerox WorkCentre M123/M1282.2-10 new, validated
Xerox WorkCentre Pro 32/40 Color2.2-10 new, validated
Xerox WorkCentre Pro 35/45/552.2-10 new, validated
Xerox WorkCentre Pro 423/4282.2-10 new, validated
Other changes in kit

Corrects a problem in printing the PSM$ANNOUNCE text on separator pages. This involves replacing several library modules.

Corrects problems with model definitions for printers that do not support PostScript job synchronization using Ctrl-D. This involves replacing several library modules.

Corrects a problem in the PostScript layup handling that caused an error with some printer models. To do this, it replaces the KIT_PS__NUP module in the PrintKit device control library.

Corrects a problem in the PostScript separator page display that caused an error with some printer models. To do this, it replaces the KIT_PS_SEP_INFO module in the PrintKit device control library.